You are viewing docs on Elastic's new documentation system, currently in technical preview. For all other Elastic docs, visit elastic.co/guide.

Cisco ASA

Collect logs from Cisco ASA with Elastic Agent.

Version
2.32.0 (View all)
Compatible Kibana version(s)
8.7.1 or higher
Supported Serverless project types

Security
Observability
Subscription level
Basic
Level of support
Elastic

This integration is for Cisco ASA network device's logs. It includes the following datasets for receiving logs over syslog or read from a file:

  • log dataset: supports Cisco ASA firewall logs.

Logs

ASA

The log dataset collects the Cisco ASA firewall logs.

An example event for log looks as following:

{
    "@timestamp": "2018-10-10T12:34:56.000Z",
    "agent": {
        "ephemeral_id": "3e750a6f-0315-4d23-b673-90c997a5320b",
        "id": "38e64915-8382-4988-ab00-33b6b749dcdb",
        "name": "docker-fleet-agent",
        "type": "filebeat",
        "version": "8.11.4"
    },
    "cisco": {
        "asa": {
            "destination_interface": "outside",
            "full_message": "Built dynamic TCP translation from inside:172.31.98.44/1772 to outside:192.168.98.44/8256",
            "source_interface": "inside"
        }
    },
    "data_stream": {
        "dataset": "cisco_asa.log",
        "namespace": "ep",
        "type": "logs"
    },
    "destination": {
        "address": "192.168.98.44",
        "ip": "192.168.98.44",
        "port": 8256
    },
    "ecs": {
        "version": "8.11.0"
    },
    "elastic_agent": {
        "id": "38e64915-8382-4988-ab00-33b6b749dcdb",
        "snapshot": false,
        "version": "8.11.4"
    },
    "event": {
        "action": "firewall-rule",
        "agent_id_status": "verified",
        "category": [
            "network"
        ],
        "code": "305011",
        "dataset": "cisco_asa.log",
        "ingested": "2024-02-22T13:07:31Z",
        "kind": "event",
        "original": "Oct 10 2018 12:34:56 localhost CiscoASA[999]: %ASA-6-305011: Built dynamic TCP translation from inside:172.31.98.44/1772 to outside:192.168.98.44/8256",
        "severity": 6,
        "timezone": "UTC",
        "type": [
            "info"
        ]
    },
    "host": {
        "hostname": "localhost"
    },
    "input": {
        "type": "udp"
    },
    "log": {
        "level": "informational",
        "source": {
            "address": "172.18.0.7:33197"
        }
    },
    "network": {
        "community_id": "1:5fapvb2/9FPSvoCspfD2WiW0NdQ=",
        "iana_number": "6",
        "transport": "tcp"
    },
    "observer": {
        "egress": {
            "interface": {
                "name": "outside"
            }
        },
        "hostname": "localhost",
        "ingress": {
            "interface": {
                "name": "inside"
            }
        },
        "product": "asa",
        "type": "firewall",
        "vendor": "Cisco"
    },
    "process": {
        "name": "CiscoASA",
        "pid": 999
    },
    "related": {
        "hosts": [
            "localhost"
        ],
        "ip": [
            "172.31.98.44",
            "192.168.98.44"
        ]
    },
    "source": {
        "address": "172.31.98.44",
        "ip": "172.31.98.44",
        "port": 1772
    },
    "tags": [
        "preserve_original_event",
        "keep_message",
        "cisco-asa",
        "forwarded"
    ]
}

Exported fields

FieldDescriptionType
@timestamp
Date/time when the event originated. This is the date/time extracted from the event, typically representing when the event was generated by the source. If the event source has no original timestamp, this value is typically populated by the first time the event was received by the pipeline. Required field for all events.
date
cisco.asa.aaa_type
The AAA operation type. One of authentication, authorization, or accounting.
keyword
cisco.asa.assigned_ip
The IP address assigned to a VPN client successfully connecting
ip
cisco.asa.burst.avg_rate
The current average burst rate seen
keyword
cisco.asa.burst.configured_avg_rate
The current configured average burst rate allowed
keyword
cisco.asa.burst.configured_rate
The current configured burst rate
keyword
cisco.asa.burst.cumulative_count
The total count of burst rate hits since the object was created or cleared
keyword
cisco.asa.burst.current_rate
The current burst rate seen
keyword
cisco.asa.burst.id
The related rate ID for burst warnings
keyword
cisco.asa.burst.object
The related object for burst warnings
keyword
cisco.asa.command_line_arguments
The command line arguments logged by the local audit log
keyword
cisco.asa.connection_id
Unique identifier for a flow.
keyword
cisco.asa.connection_type
The VPN connection type
keyword
cisco.asa.dap_records
The assigned DAP records
keyword
cisco.asa.destination_interface
Destination interface for the flow or event.
keyword
cisco.asa.destination_user_security_group_tag
The Security Group Tag for the destination user. Security Group Tag are 16-bit identifiers used to represent logical group privilege.
long
cisco.asa.destination_user_security_group_tag_name
The name of Security Group Tag for the destination user.
keyword
cisco.asa.destination_username
Name of the user that is the destination for this event.
keyword
cisco.asa.full_message
The Cisco log message text.
keyword
cisco.asa.icmp_code
ICMP code.
short
cisco.asa.icmp_type
ICMP type.
short
cisco.asa.mapped_destination_host
keyword
cisco.asa.mapped_destination_ip
The translated destination IP address.
ip
cisco.asa.mapped_destination_port
The translated destination port.
long
cisco.asa.mapped_source_host
keyword
cisco.asa.mapped_source_ip
The translated source IP address.
ip
cisco.asa.mapped_source_port
The translated source port.
long
cisco.asa.message
The message associated with SIP and Skinny VoIP events
keyword
cisco.asa.message_id
The Cisco ASA message identifier.
keyword
cisco.asa.original_iana_number
IANA Protocol Number of the original IP payload.
short
cisco.asa.privilege.new
When a users privilege is changed this is the new value
keyword
cisco.asa.privilege.old
When a users privilege is changed this is the old value
keyword
cisco.asa.rejection_reason
Reason for an AAA authentication rejection.
keyword
cisco.asa.rule_name
Name of the Access Control List rule that matched this event.
keyword
cisco.asa.security
Cisco FTD security event fields.
flattened
cisco.asa.session_type
Session type (for example, IPsec or UDP).
keyword
cisco.asa.source_interface
Source interface for the flow or event.
keyword
cisco.asa.source_user_security_group_tag
The Security Group Tag for the source user. Security Group Tag are 16-bit identifiers used to represent logical group privilege.
long
cisco.asa.source_user_security_group_tag_name
The name of Security Group Tag for the source user.
keyword
cisco.asa.source_username
Name of the user that is the source for this event.
keyword
cisco.asa.suffix
Optional suffix after %ASA identifier.
keyword
cisco.asa.termination_initiator
Interface name of the side that initiated the teardown
keyword
cisco.asa.termination_user
AAA name of user requesting termination
keyword
cisco.asa.threat_category
Category for the malware / botnet traffic. For example: virus, botnet, trojan, etc.
keyword
cisco.asa.threat_level
Threat level for malware / botnet traffic. One of very-low, low, moderate, high or very-high.
keyword
cisco.asa.tunnel_type
SA type (remote access or L2L)
keyword
cisco.asa.username
keyword
cisco.asa.webvpn.group_name
The WebVPN group name the user belongs to
keyword
client.address
Some event client addresses are defined ambiguously. The event will sometimes list an IP, a domain or a unix socket. You should always store the raw address in the .address field. Then it should be duplicated to .ip or .domain, depending on which one it is.
keyword
client.domain
The domain name of the client system. This value may be a host name, a fully qualified domain name, or another host naming format. The value may derive from the original event or be added from enrichment.
keyword
client.ip
IP address of the client (IPv4 or IPv6).
ip
client.port
Port of the client.
long
client.user.name
Short name or login of the user.
keyword
client.user.name.text
Multi-field of client.user.name.
match_only_text
cloud.account.id
The cloud account or organization id used to identify different entities in a multi-tenant environment. Examples: AWS account id, Google Cloud ORG Id, or other unique identifier.
keyword
cloud.availability_zone
Availability zone in which this host is running.
keyword
cloud.image.id
Image ID for the cloud instance.
keyword
cloud.instance.id
Instance ID of the host machine.
keyword
cloud.instance.name
Instance name of the host machine.
keyword
cloud.machine.type
Machine type of the host machine.
keyword
cloud.project.id
Name of the project in Google Cloud.
keyword
cloud.provider
Name of the cloud provider. Example values are aws, azure, gcp, or digitalocean.
keyword
cloud.region
Region in which this host is running.
keyword
container.id
Unique container id.
keyword
container.image.name
Name of the image the container was built on.
keyword
container.labels
Image labels.
object
container.name
Container name.
keyword
data_stream.dataset
Data stream dataset.
constant_keyword
data_stream.namespace
Data stream namespace.
constant_keyword
data_stream.type
Data stream type.
constant_keyword
destination.address
Some event destination addresses are defined ambiguously. The event will sometimes list an IP, a domain or a unix socket. You should always store the raw address in the .address field. Then it should be duplicated to .ip or .domain, depending on which one it is.
keyword
destination.as.number
Unique number allocated to the autonomous system. The autonomous system number (ASN) uniquely identifies each network on the Internet.
long
destination.as.organization.name
Organization name.
keyword
destination.as.organization.name.text
Multi-field of destination.as.organization.name.
match_only_text
destination.bytes
Bytes sent from the destination to the source.
long
destination.domain
The domain name of the destination system. This value may be a host name, a fully qualified domain name, or another host naming format. The value may derive from the original event or be added from enrichment.
keyword
destination.geo.city_name
City name.
keyword
destination.geo.continent_code
Two-letter code representing continent's name.
keyword
destination.geo.continent_name
Name of the continent.
keyword
destination.geo.country_iso_code
Country ISO code.
keyword
destination.geo.country_name
Country name.
keyword
destination.geo.location
Longitude and latitude.
geo_point
destination.geo.name
User-defined description of a location, at the level of granularity they care about. Could be the name of their data centers, the floor number, if this describes a local physical entity, city names. Not typically used in automated geolocation.
keyword
destination.geo.postal_code
Postal code associated with the location. Values appropriate for this field may also be known as a postcode or ZIP code and will vary widely from country to country.
keyword
destination.geo.region_iso_code
Region ISO code.
keyword
destination.geo.region_name
Region name.
keyword
destination.geo.timezone
The time zone of the location, such as IANA time zone name.
keyword
destination.ip
IP address of the destination (IPv4 or IPv6).
ip
destination.nat.ip
Translated ip of destination based NAT sessions (e.g. internet to private DMZ) Typically used with load balancers, firewalls, or routers.
ip
destination.nat.port
Port the source session is translated to by NAT Device. Typically used with load balancers, firewalls, or routers.
long
destination.port
Port of the destination.
long
destination.user.domain
Name of the directory the user is a member of. For example, an LDAP or Active Directory domain name.
keyword
destination.user.email
User email address.
keyword
destination.user.name
Short name or login of the user.
keyword
destination.user.name.text
Multi-field of destination.user.name.
match_only_text
ecs.version
ECS version this event conforms to. ecs.version is a required field and must exist in all events. When querying across multiple indices -- which may conform to slightly different ECS versions -- this field lets integrations adjust to the schema version of the events.
keyword
error.message
Error message.
match_only_text
event.category
This is one of four ECS Categorization Fields, and indicates the second level in the ECS category hierarchy. event.category represents the "big buckets" of ECS categories. For example, filtering on event.category:process yields all events relating to process activity. This field is closely related to event.type, which is used as a subcategory. This field is an array. This will allow proper categorization of some events that fall in multiple categories.
keyword
event.code
Identification code for this event, if one exists. Some event sources use event codes to identify messages unambiguously, regardless of message language or wording adjustments over time. An example of this is the Windows Event ID.
keyword
event.created
event.created contains the date/time when the event was first read by an agent, or by your pipeline. This field is distinct from @timestamp in that @timestamp typically contain the time extracted from the original event. In most situations, these two timestamps will be slightly different. The difference can be used to calculate the delay between your source generating an event, and the time when your agent first processed it. This can be used to monitor your agent's or pipeline's ability to keep up with your event source. In case the two timestamps are identical, @timestamp should be used.
date
event.dataset
Event dataset
constant_keyword
event.duration
Duration of the event in nanoseconds. If event.start and event.end are known this value should be the difference between the end and start time.
long
event.end
event.end contains the date when the event ended or when the activity was last observed.
date
event.ingested
Timestamp when an event arrived in the central data store. This is different from @timestamp, which is when the event originally occurred. It's also different from event.created, which is meant to capture the first time an agent saw the event. In normal conditions, assuming no tampering, the timestamps should chronologically look like this: @timestamp < event.created < event.ingested.
date
event.kind
This is one of four ECS Categorization Fields, and indicates the highest level in the ECS category hierarchy. event.kind gives high-level information about what type of information the event contains, without being specific to the contents of the event. For example, values of this field distinguish alert events from metric events. The value of this field can be used to inform how these kinds of events should be handled. They may warrant different retention, different access control, it may also help understand whether the data is coming in at a regular interval or not.
keyword
event.module
Event module
constant_keyword
event.provider
Source of the event. Event transports such as Syslog or the Windows Event Log typically mention the source of an event. It can be the name of the software that generated the event (e.g. Sysmon, httpd), or of a subsystem of the operating system (kernel, Microsoft-Windows-Security-Auditing).
keyword
event.severity
The numeric severity of the event according to your event source. What the different severity values mean can be different between sources and use cases. It's up to the implementer to make sure severities are consistent across events from the same source. The Syslog severity belongs in log.syslog.severity.code. event.severity is meant to represent the severity according to the event source (e.g. firewall, IDS). If the event source does not publish its own severity, you may optionally copy the log.syslog.severity.code to event.severity.
long
event.start
event.start contains the date when the event started or when the activity was first observed.
date
event.timezone
This field should be populated when the event's timestamp does not include timezone information already (e.g. default Syslog timestamps). It's optional otherwise. Acceptable timezone formats are: a canonical ID (e.g. "Europe/Amsterdam"), abbreviated (e.g. "EST") or an HH:mm differential (e.g. "-05:00").
keyword
event.type
This is one of four ECS Categorization Fields, and indicates the third level in the ECS category hierarchy. event.type represents a categorization "sub-bucket" that, when used along with the event.category field values, enables filtering events down to a level appropriate for single visualization. This field is an array. This will allow proper categorization of some events that fall in multiple event types.
keyword
file.path
Full path to the file, including the file name. It should include the drive letter, when appropriate.
keyword
file.path.text
Multi-field of file.path.
match_only_text
host.architecture
Operating system architecture.
keyword
host.containerized
If the host is a container.
boolean
host.domain
Name of the domain of which the host is a member. For example, on Windows this could be the host's Active Directory domain or NetBIOS domain name. For Linux this could be the domain of the host's LDAP provider.
keyword
host.hostname
Hostname of the host. It normally contains what the hostname command returns on the host machine.
keyword
host.id
Unique host id. As hostname is not always unique, use values that are meaningful in your environment. Example: The current usage of beat.name.
keyword
host.ip
Host ip addresses.
ip
host.mac
Host mac addresses.
keyword
host.name
Name of the host. It can contain what hostname returns on Unix systems, the fully qualified domain name, or a name specified by the user. The sender decides which value to use.
keyword
host.os.build
OS build information.
keyword
host.os.codename
OS codename, if any.
keyword
host.os.family
OS family (such as redhat, debian, freebsd, windows).
keyword
host.os.kernel
Operating system kernel version as a raw string.
keyword
host.os.name
Operating system name, without the version.
keyword
host.os.name.text
Multi-field of host.os.name.
text
host.os.platform
Operating system platform (such centos, ubuntu, windows).
keyword
host.os.version
Operating system version as a raw string.
keyword
host.type
Type of host. For Cloud providers this can be the machine type like t2.medium. If vm, this could be the container, for example, or other information meaningful in your environment.
keyword
input.type
Input type.
keyword
labels
Custom key/value pairs. Can be used to add meta information to events. Should not contain nested objects. All values are stored as keyword. Example: docker and k8s labels.
object
log.file.path
Full path to the log file this event came from, including the file name. It should include the drive letter, when appropriate. If the event wasn't read from a log file, do not populate this field.
keyword
log.level
Original log level of the log event. If the source of the event provides a log level or textual severity, this is the one that goes in log.level. If your source doesn't specify one, you may put your event transport's severity here (e.g. Syslog severity). Some examples are warn, err, i, informational.
keyword
log.offset
Offset of the entry in the log file.
long
log.source.address
Source address from which the log event was read / sent from.
keyword
log.syslog.facility.code
The Syslog numeric facility of the log event, if available. According to RFCs 5424 and 3164, this value should be an integer between 0 and 23.
long
log.syslog.priority
Syslog numeric priority of the event, if available. According to RFCs 5424 and 3164, the priority is 8 * facility + severity. This number is therefore expected to contain a value between 0 and 191.
long
log.syslog.severity.code
The Syslog numeric severity of the log event, if available. If the event source publishing via Syslog provides a different numeric severity value (e.g. firewall, IDS), your source's numeric severity should go to event.severity. If the event source does not specify a distinct severity, you can optionally copy the Syslog severity to event.severity.
long
message
For log events the message field contains the log message, optimized for viewing in a log viewer. For structured logs without an original message field, other fields can be concatenated to form a human-readable summary of the event. If multiple messages exist, they can be combined into one message.
match_only_text
network.bytes
Total bytes transferred in both directions. If source.bytes and destination.bytes are known, network.bytes is their sum.
long
network.community_id
A hash of source and destination IPs and ports, as well as the protocol used in a communication. This is a tool-agnostic standard to identify flows. Learn more at https://github.com/corelight/community-id-spec.
keyword
network.direction
Direction of the network traffic. When mapping events from a host-based monitoring context, populate this field from the host's point of view, using the values "ingress" or "egress". When mapping events from a network or perimeter-based monitoring context, populate this field from the point of view of the network perimeter, using the values "inbound", "outbound", "internal" or "external". Note that "internal" is not crossing perimeter boundaries, and is meant to describe communication between two hosts within the perimeter. Note also that "external" is meant to describe traffic between two hosts that are external to the perimeter. This could for example be useful for ISPs or VPN service providers.
keyword
network.iana_number
IANA Protocol Number (https://www.iana.org/assignments/protocol-numbers/protocol-numbers.xhtml). Standardized list of protocols. This aligns well with NetFlow and sFlow related logs which use the IANA Protocol Number.
keyword
network.inner
Network.inner fields are added in addition to network.vlan fields to describe the innermost VLAN when q-in-q VLAN tagging is present. Allowed fields include vlan.id and vlan.name. Inner vlan fields are typically used when sending traffic with multiple 802.1q encapsulations to a network sensor (e.g. Zeek, Wireshark.)
object
network.inner.vlan.id
VLAN ID as reported by the observer.
keyword
network.inner.vlan.name
Optional VLAN name as reported by the observer.
keyword
network.protocol
In the OSI Model this would be the Application Layer protocol. For example, http, dns, or ssh. The field value must be normalized to lowercase for querying.
keyword
network.transport
Same as network.iana_number, but instead using the Keyword name of the transport layer (udp, tcp, ipv6-icmp, etc.) The field value must be normalized to lowercase for querying.
keyword
network.type
In the OSI Model this would be the Network Layer. ipv4, ipv6, ipsec, pim, etc The field value must be normalized to lowercase for querying.
keyword
observer.egress.interface.name
Interface name as reported by the system.
keyword
observer.egress.zone
Network zone of outbound traffic as reported by the observer to categorize the destination area of egress traffic, e.g. Internal, External, DMZ, HR, Legal, etc.
keyword
observer.geo.city_name
City name.
keyword
observer.geo.continent_code
Two-letter code representing continent's name.
keyword
observer.geo.continent_name
Name of the continent.
keyword
observer.geo.country_iso_code
Country ISO code.
keyword
observer.geo.country_name
Country name.
keyword
observer.geo.location
Longitude and latitude.
geo_point
observer.geo.name
User-defined description of a location, at the level of granularity they care about. Could be the name of their data centers, the floor number, if this describes a local physical entity, city names. Not typically used in automated geolocation.
keyword
observer.geo.postal_code
Postal code associated with the location. Values appropriate for this field may also be known as a postcode or ZIP code and will vary widely from country to country.
keyword
observer.geo.region_iso_code
Region ISO code.
keyword
observer.geo.region_name
Region name.
keyword
observer.geo.timezone
The time zone of the location, such as IANA time zone name.
keyword
observer.hostname
Hostname of the observer.
keyword
observer.ingress.interface.name
Interface name as reported by the system.
keyword
observer.ingress.zone
Network zone of incoming traffic as reported by the observer to categorize the source area of ingress traffic. e.g. internal, External, DMZ, HR, Legal, etc.
keyword
observer.ip
IP addresses of the observer.
ip
observer.name
Custom name of the observer. This is a name that can be given to an observer. This can be helpful for example if multiple firewalls of the same model are used in an organization. If no custom name is needed, the field can be left empty.
keyword
observer.product
The product name of the observer.
keyword
observer.type
The type of the observer the data is coming from. There is no predefined list of observer types. Some examples are forwarder, firewall, ids, ips, proxy, poller, sensor, APM server.
keyword
observer.vendor
Vendor name of the observer.
keyword
observer.version
Observer version.
keyword
process.name
Process name. Sometimes called program name or similar.
keyword
process.name.text
Multi-field of process.name.
match_only_text
process.pid
Process id.
long
related.hosts
All hostnames or other host identifiers seen on your event. Example identifiers include FQDNs, domain names, workstation names, or aliases.
keyword
related.ip
All of the IPs seen on your event.
ip
related.user
All the user names or other user identifiers seen on the event.
keyword
server.address
Some event server addresses are defined ambiguously. The event will sometimes list an IP, a domain or a unix socket. You should always store the raw address in the .address field. Then it should be duplicated to .ip or .domain, depending on which one it is.
keyword
server.domain
The domain name of the server system. This value may be a host name, a fully qualified domain name, or another host naming format. The value may derive from the original event or be added from enrichment.
keyword
server.ip
IP address of the server (IPv4 or IPv6).
ip
server.port
Port of the server.
long
server.user.name
Short name or login of the user.
keyword
server.user.name.text
Multi-field of server.user.name.
match_only_text
source.address
Some event source addresses are defined ambiguously. The event will sometimes list an IP, a domain or a unix socket. You should always store the raw address in the .address field. Then it should be duplicated to .ip or .domain, depending on which one it is.
keyword
source.as.number
Unique number allocated to the autonomous system. The autonomous system number (ASN) uniquely identifies each network on the Internet.
long
source.as.organization.name
Organization name.
keyword
source.as.organization.name.text
Multi-field of source.as.organization.name.
match_only_text
source.bytes
Bytes sent from the source to the destination.
long
source.domain
The domain name of the source system. This value may be a host name, a fully qualified domain name, or another host naming format. The value may derive from the original event or be added from enrichment.
keyword
source.geo.city_name
City name.
keyword
source.geo.continent_code
Two-letter code representing continent's name.
keyword
source.geo.continent_name
Name of the continent.
keyword
source.geo.country_iso_code
Country ISO code.
keyword
source.geo.country_name
Country name.
keyword
source.geo.location
Longitude and latitude.
geo_point
source.geo.name
User-defined description of a location, at the level of granularity they care about. Could be the name of their data centers, the floor number, if this describes a local physical entity, city names. Not typically used in automated geolocation.
keyword
source.geo.postal_code
Postal code associated with the location. Values appropriate for this field may also be known as a postcode or ZIP code and will vary widely from country to country.
keyword
source.geo.region_iso_code
Region ISO code.
keyword
source.geo.region_name
Region name.
keyword
source.geo.timezone
The time zone of the location, such as IANA time zone name.
keyword
source.ip
IP address of the source (IPv4 or IPv6).
ip
source.nat.ip
Translated ip of source based NAT sessions (e.g. internal client to internet) Typically connections traversing load balancers, firewalls, or routers.
ip
source.nat.port
Translated port of source based NAT sessions. (e.g. internal client to internet) Typically used with load balancers, firewalls, or routers.
long
source.port
Port of the source.
long
source.user.domain
Name of the directory the user is a member of. For example, an LDAP or Active Directory domain name.
keyword
source.user.email
User email address.
keyword
source.user.group.name
Name of the group.
keyword
source.user.name
Short name or login of the user.
keyword
source.user.name.text
Multi-field of source.user.name.
match_only_text
tags
List of keywords used to tag each event.
keyword
url.domain
Domain of the url, such as "www.elastic.co". In some cases a URL may refer to an IP and/or port directly, without a domain name. In this case, the IP address would go to the domain field. If the URL contains a literal IPv6 address enclosed by [ and ] (IETF RFC 2732), the [ and ] characters should also be captured in the domain field.
keyword
url.extension
The field contains the file extension from the original request url, excluding the leading dot. The file extension is only set if it exists, as not every url has a file extension. The leading period must not be included. For example, the value must be "png", not ".png". Note that when the file name has multiple extensions (example.tar.gz), only the last one should be captured ("gz", not "tar.gz").
keyword
url.fragment
Portion of the url after the #, such as "top". The # is not part of the fragment.
keyword
url.full
If full URLs are important to your use case, they should be stored in url.full, whether this field is reconstructed or present in the event source.
wildcard
url.full.text
Multi-field of url.full.
match_only_text
url.original
Unmodified original url as seen in the event source. Note that in network monitoring, the observed URL may be a full URL, whereas in access logs, the URL is often just represented as a path. This field is meant to represent the URL as it was observed, complete or not.
wildcard
url.original.text
Multi-field of url.original.
match_only_text
url.password
Password of the request.
keyword
url.path
Path of the request, such as "/search".
wildcard
url.port
Port of the request, such as 443.
long
url.query
The query field describes the query string of the request, such as "q=elasticsearch". The ? is excluded from the query string. If a URL contains no ?, there is no query field. If there is a ? but no query, the query field exists with an empty string. The exists query can be used to differentiate between the two cases.
keyword
url.registered_domain
The highest registered url domain, stripped of the subdomain. For example, the registered domain for "foo.example.com" is "example.com". This value can be determined precisely with a list like the public suffix list (http://publicsuffix.org). Trying to approximate this by simply taking the last two labels will not work well for TLDs such as "co.uk".
keyword
url.scheme
Scheme of the request, such as "https". Note: The : is not part of the scheme.
keyword
url.subdomain
The subdomain portion of a fully qualified domain name includes all of the names except the host name under the registered_domain. In a partially qualified domain, or if the the qualification level of the full name cannot be determined, subdomain contains all of the names below the registered domain. For example the subdomain portion of "www.east.mydomain.co.uk" is "east". If the domain has multiple levels of subdomain, such as "sub2.sub1.example.com", the subdomain field should contain "sub2.sub1", with no trailing period.
keyword
url.top_level_domain
The effective top level domain (eTLD), also known as the domain suffix, is the last part of the domain name. For example, the top level domain for example.com is "com". This value can be determined precisely with a list like the public suffix list (http://publicsuffix.org). Trying to approximate this by simply taking the last label will not work well for effective TLDs such as "co.uk".
keyword
url.username
Username of the request.
keyword
user.email
User email address.
keyword
user.name
Short name or login of the user.
keyword
user.name.text
Multi-field of user.name.
match_only_text

Changelog

VersionDetailsKibana version(s)

2.32.0

Enhancement View pull request
Update package spec to 3.0.3.

8.7.1 or higher

2.31.0

Enhancement View pull request
Add message ids 722022, 722023.

8.7.1 or higher

2.30.1

Enhancement View pull request
Changed owners

8.7.1 or higher

2.30.0

Enhancement View pull request
Retain email address of source and destination user.

8.7.1 or higher

2.29.0

Bug fix View pull request
Support spaces and special characters in usernames.

Bug fix View pull request
Add destination SGT-integer:SGT-name to 313005.

8.7.1 or higher

2.28.1

Bug fix View pull request
Fix exclude_files pattern.

8.7.1 or higher

2.28.0

Enhancement View pull request
ECS version updated to 8.11.0.

8.7.1 or higher

2.27.1

Bug fix View pull request
Support usernames ending with "$".

Bug fix View pull request
Add "User was not found" as reason to 113015.

Bug fix View pull request
Allow source to be a domain or an IP inside 313005.

Bug fix View pull request
Create non-capturing groups for CISCO_USER GROK pattern

8.7.1 or higher

2.27.0

Enhancement View pull request
Improve 'event.original' check to avoid errors if set.

8.7.1 or higher

2.26.1

Bug fix View pull request
Accept SGT-integer:SGT-name as username

Bug fix View pull request
Allow usernames to end with "$"

Bug fix View pull request
Update network.inner to object as per ECS standard.

8.7.1 or higher

2.26.0

Enhancement View pull request
Add support for 113015 events.

Bug fix View pull request
Accept "*****" as a valid username value.

8.7.1 or higher

2.25.3

Bug fix View pull request
Fix field mapping for empty groups imported from ECS

8.7.1 or higher

2.25.2

Bug fix View pull request
Fix the protocol field processing in 313005.

8.7.1 or higher

2.25.1

Bug fix View pull request
Remove redundant regular expression quantifier.

8.7.1 or higher

2.25.0

Enhancement View pull request
Update the package format_version to 3.0.0.

8.7.1 or higher

2.24.0

Enhancement View pull request
Extend authenticaton rejection reasons that are accepted.

Enhancement View pull request
Retain the authenticaton rejection reason.

8.7.1 or higher

2.23.0

Enhancement View pull request
Update package to ECS 8.10.0 and align ECS categorization fields.

8.7.1 or higher

2.22.0

Enhancement View pull request
Add tags.yml file so that integration's dashboards and saved searches are tagged with "Security Solution" and displayed in the Security Solution UI.

8.7.1 or higher

2.21.0

Enhancement View pull request
Update package-spec to 2.10.0.

8.7.1 or higher

2.20.4

Bug fix View pull request
Add support for unspecified reason AAA user authenticaton rejection.

8.7.1 or higher

2.20.3

Bug fix View pull request
Add missing geo field mappings

8.7.1 or higher

2.20.2

Bug fix View pull request
Fix the processing of event 313005 when ports are missing.

Bug fix View pull request
Collect network.transport for events 722033 and 722034.

8.7.1 or higher

2.20.1

Bug fix View pull request
Fix the handling of spaces in 113005 messages.

8.7.1 or higher

2.20.0

Enhancement View pull request
Update package to ECS 8.9.0.

8.7.1 or higher

2.19.0

Enhancement View pull request
Convert dashboard to lens.

8.7.1 or higher

2.18.0

Enhancement View pull request
Ensure event.kind is correctly set for pipeline errors.

8.1.0 or higher

2.17.1

Bug fix View pull request
Fix VPN event.action

8.1.0 or higher

2.17.0

Enhancement View pull request
Update package to ECS 8.8.0.

8.1.0 or higher

2.16.0

Enhancement View pull request
Support 722011, 722033 and 722034 messages.

Bug fix View pull request
Fix handling of 722037 and 722051 messages.

8.1.0 or higher

2.15.0

Enhancement View pull request
Update package to ECS 8.7.0.

8.1.0 or higher

2.14.1

Enhancement View pull request
Added categories and/or subcategories.

8.1.0 or higher

2.14.0

Enhancement View pull request
Allow retention of a searchable log message.

8.1.0 or higher

2.13.2

Bug fix View pull request
Support additional patterns in 113012, 113004, and 716039 messages

8.1.0 or higher

2.13.1

Bug fix View pull request
Remove ignore_failure causing performance bottleneck

8.1.0 or higher

2.13.0

Enhancement View pull request
Allow configuration of time zones.

8.1.0 or higher

2.12.1

Bug fix View pull request
Interchange source, destination for messages 302013 & 302015 as per Cisco doc

8.1.0 or higher

2.12.0

Enhancement View pull request
Update package to ECS 8.6.0.

8.1.0 or higher

2.11.0

Enhancement View pull request
Add udp_options to the UDP input.

8.1.0 or higher

2.10.1

Enhancement View pull request
Migrate the visualizations to by value in dashboards to minimize the saved object clutter and reduce time to load

8.1.0 or higher

2.10.0

Enhancement View pull request
Allow configuration of internal/external zones

7.16.0 or higher
8.0.0 or higher

2.9.0

Enhancement View pull request
Update package to ECS 8.5.0.

7.16.0 or higher
8.0.0 or higher

2.8.0

Enhancement View pull request
Harmonise with pipeline with Cisco FTD.

7.16.0 or higher
8.0.0 or higher

2.7.7

Bug fix View pull request
Remove duplicate fields.

7.16.0 or higher
8.0.0 or higher

2.7.6

Bug fix View pull request
Remove duplicate field.

7.16.0 or higher
8.0.0 or higher

2.7.5

Bug fix View pull request
Fix handling of 302020 event messages.

7.16.0 or higher
8.0.0 or higher

2.7.4

Enhancement View pull request
Use ECS geo.location definition.

7.16.0 or higher
8.0.0 or higher

2.7.3

Bug fix View pull request
Fix handling of non-canonical 113005 messages.

7.16.0 or higher
8.0.0 or higher

2.7.2

Bug fix View pull request
Clean up grok pattern naming.

7.16.0 or higher
8.0.0 or higher

2.7.1

Bug fix View pull request
Fix handling of some non-canonical log formats.

7.16.0 or higher
8.0.0 or higher

2.7.0

Enhancement View pull request
Add handling of AAA operations.

7.16.0 or higher
8.0.0 or higher

2.6.0

Enhancement View pull request
Update package to ECS 8.4.0

7.16.0 or higher
8.0.0 or higher

2.5.2

Enhancement View pull request
Improve TCP, SSL config description and example.

7.16.0 or higher
8.0.0 or higher

2.5.1

Bug fix View pull request
Fix handling of user parsing when SGT fields are present.

Bug fix View pull request
Fix handling of user parsing for 302013 and 302015 events.

7.16.0 or higher
8.0.0 or higher

2.5.0

Enhancement View pull request
Update package to ECS 8.3.0.

7.16.0 or higher
8.0.0 or higher

2.4.2

Bug fix View pull request
Map syslog priority details according to ECS

Bug fix View pull request
Extract syslog facility and severity codes from syslog priority

7.16.0 or higher
8.0.0 or higher

2.4.1

Bug fix View pull request
Ensure invalid event.outcome does not get recorded in event

7.16.0 or higher
8.0.0 or higher

2.4.0

Enhancement View pull request
Add TCP input with TLS support

—

2.3.0

Enhancement View pull request
Update to ECS 8.2

7.16.0 or higher
8.0.0 or higher

2.2.2

Bug fix View pull request
Change visualizations to use event.code instead of cisco.asa.message_id.

—

2.2.1

Enhancement View pull request
Add documentation for multi-fields

7.16.0 or higher
8.0.0 or higher

2.2.0

Enhancement View pull request
Add community_id processor, update 805001, 304001, 106023 and 602304 message parsing. elastic/beats#26879

Enhancement View pull request
Add user.name field to ASA Security negotiation log line. elastic/beats#26975

Enhancement View pull request
Change event.outcome and event.type handling to be more ECS compliant. elastic/beats#29698

7.16.0 or higher
8.0.0 or higher

2.1.0

Enhancement View pull request
Add parsing for event code 113029-113040

7.16.0 or higher
8.0.0 or higher

2.0.1

Bug fix View pull request
Clarify configuration option documentation

7.16.0 or higher
8.0.0 or higher

2.0.0

Enhancement View pull request
Update to ECS 8.0

—

1.3.2

Bug fix View pull request
Regenerate test files using the new GeoIP database

7.16.0 or higher
8.0.0 or higher

1.3.1

Bug fix View pull request
Change test public IPs to the supported subset

—

1.3.0

Enhancement View pull request
Add 8.0.0 version constraint

7.16.0 or higher
8.0.0 or higher

1.2.2

Enhancement View pull request
Update Title and Description.

7.16.0 or higher

1.2.1

Bug fix View pull request
Relax time parsing and capture group and session type in Cisco ASA module

—

1.2.0

Enhancement View pull request
Add support for Cisco ASA SIP events

—

1.1.1

Bug fix View pull request
Fix logic that checks for the 'forwarded' tag

—

1.1.0

Enhancement View pull request
Update to ECS 1.12.0

—

1.0.1

Bug fix View pull request
Adding missing ECS fields

—

1.0.0

Enhancement View pull request
Split Cisco ASA into its own package

—

On this page